Help Line No +91 9667003082

Thread Locker Dispensing Unit

Thread Locker Dispensing Unit


Thread coating machine great for coating thread locking adhesive and Anaerobic on Screw, bolts, studs, bolt, nuts, wood screws, self-tapping screws, washers, variety of pneumatic fittings etc.

PRODUCT SPECIFICATION

Length <120mm
ID Size M5-M30
Range no limit
Drive Precision step motor
Control way Micro Master
Input Air pressure >5 bar(1bar =1.01972kg/cm² =14.5038psi)
Input voltage 110/220VAC(Internal conversion)
Size (WxDxH) mm 390 x 360 x 340mm
Weight 10 Kgs

Want to buy even more quantity?

GET BULK QUOTE NOW

Features of the LD 2004L3 Thread Locker Dispensing Unit:-

1. Table and uniform spiting, fast processing speed.
2. Reduce reject rate, defects, rework time and spot guiding.
3. Replace of screws gasket and sealing belt, and keep the thread from chemical corrosion.
4. Improve greatly resistance vibrations, high temperature, and anti-loose, and the rate of use and reuse the screw of pneumatic joint or others.
5. Add high precision liner rail on the load and unload material, Independent cylinder driving, greatly improve the stability.
6. Add springing advice above of dispensing nozzle, which prevents jumping tooth with screw if diameter precision is not high or screw ends tapered down slightly.
7. The thimble cylinder quote big cylinder which keeping the function of moving and regulating, more live up to different length products replacing operations.
8. Replace of screws gasket and sealing belt, and keep the thread from chemical corrosion.
9. Improve greatly resistance vibrations, high temperature, and anti-loose, and the rate of use and reuse the screw of pneumatic joint or others.
10. Set freely the alveolar amount, position and width of dispensing. Can adjust the start and end positions of adhesive gluing, any total or partial.
11. High precision position, fast speed, high efficiency and long use life; High quality, accurate and consistent to coating. For example, like 1mm thread, can finish a qualified product every 3 seconds.
12. Supply convenient user control screen. Intuitive operation parameters. Less than half a day, you can learn and operate. Low maintenance rate.
13. Compact body. And use the chamfer to attach part between machine and people, which can avoid injuring.
14. According to the production process need, can be configured a mass storage device,which can avoid changing the material frequently and save much time.
GREAT VALUE

The best prices on the web for the widest selection for industrial solutions.

NATIONWIDE DELIVERY

Over 25,000 pin codes serviceable across India.

SECURE PAYMENT

We have partnered with India's most secure payment solutions.

BUYER PROTECTION

We are committed to your interest to provide smooth shopping experience.

365 DAYS SUPPORT

We are available for you 24*7

LessDeal Payment Banner